Category Archives: News

All the latest news and developments from the Society

Move Day – 2 April – Early Turn “overtime” available!

The move of the panel is planned to take place at about 8am on Saturday 2 April.

This is before the advertised working party commences, but I am now seeking an additional ‘early turn’ on that day, to start at 6am, in the panel, whose task it will be to wheel the panel out onto the roof ready for its lift. All railwaymen and women love a bit of overtime, so here’s your chance!

If you are an early riser and could help with this early start (whether you’re already booked to be with us for the main part of the day or not), please let us know. Bacon rolls will be provided by Danny! Many thanks.

After the panel has departed, and for those arriving for the ‘standard’ working day, the task will be putting the building jigsaw back together again for handing-back to Network Rail, and saying a final goodbye to the building that has been Swindon Panel’s home for the last 48 years.

Panel Move Day – Calling All Photographers

The panel will move from Swindon to Didcot on Saturday 2 April on a road lorry, leaving Swindon at approximately 9am. When it arrives there it will be placed onto a railway wagon for transit into the Railway Centre later that day.

We will be very pleased to receive photographs of the panel on its journey – being lifted off the panel roof, being transported by road, being lifted onto the train, then being moved by train into the Railway Centre (including through Didcot Parkway station!)

Photos that you have taken can be sent to us via any of the usual methods (or by reply to this email). The best photograph we receive by midnight on Sunday will receive a Swindon Panel goody-bag!

Needless to say, no Flying Scotsman antics trying to get the best shot!

Latest Panel Progress and Where You Can Help!

Progress update on Monday 21 March 2016.

Thank you to everyone who has helped at Swindon Panel this last weekend. Fantastic progress was made and we’re pleased to say that the last of the major hurdles have now been cleared.

The two large frame beams were brought into the operating room and now complete the lifting frame at the front and back of the panel. With this being complete jacking screws were fitted to allow the whole frame, with panel on top, to be raised up about an inch and a half, which was sufficient to allow wheels to be fitted to the bottom of the frame. The panel was then moved back, against the back wall, (in the space on the right of the picture above), to align it with the doors.

The end door and window – another hurdle – were successfully removed by the team on Sunday (featuring father and son Chris and Andrew, pictured above), making a gap wide enough for the panel to escape the building on 2 April.

The handrails on the, rather substantial, walkway on the flat roof outside the building were removed by the team on Saturday (featuring father and son Jeremy and Danny).

Never let it be said that Swindon Panel won’t be a great day out for all the family!

These simple-sound tasks took a lot of materials, a lot of manpower, and a lot of working together. As with most things in railway preservation, they take longer than they would seem to, require more tools than they would seem to, and uncover all sorts of problems along the way!

But we are getting there – our dream is finally coming true! The panel has now been raised above 9″ (23cm) off the ground, and next weekend will be raised a further 12-14″. The “runway”(!) will then be built underneath it to give it a level journey out onto the roof (over all the obstacles such as the door threshold and flat-roof walkway).

There is still A LOT of work to be done to get the panel that last little bit raised up and the runway built out onto the roof in readiness for the move which is planned for 2 April. All hands very welcome in helping with this on SATURDAY 26 MARCH, this weekend. If you can help, even if for only part of the day, please do. Swindon Panel needs you!

We are meeting only on Saturday this coming weekend (Sunday is Easter Sunday), at 10am at the panel.

The following Saturday is….. move day.

Swindon Panel
is in the air!

Thank you very much to everyone who has helped at Swindon Panel over the last weekend. After much planning, preparations and a bit of a paperwork battle with Network Rail, Swindon Panel has now moved its first few inches towards preservation. Swindon Panel is now in the air!

Excellent progress was made and we are well on the way to moving the panel. All the steelwork has been delivered, and the panel has been lifted up and the first parts of the lifting frame inserted underneath. These will hold the weight of the panel when it is lifted by the frame. The clamp bars have also been inserted above the metalwork inside the panel to hold the panel down to the frame. The sections will all be bolted together longitudinally next weekend to make the grid base formation when some further steelwork is lifted up from ground level into the control room.

A lot of work was also carried out inside the panel to remove breakable items and unnecessary heavy items in readiness for the move, and tidying up and tying up cables inside the panel to stop them falling out on the way. Inside the panel is very full of thousands of wires, all going in different directions, and none of which were installed with moving the panel in mind!


Some of our small-part steelwork.

It is a very exciting time, now that our plans are finally coming to fruition, and we are very excited about the next couple of weekends leading towards the (planned) move date on 2nd April.


Some of the Swindon Panel members in the panel on Saturday enjoy a cup of tea from a Southern Region mug!

Special thanks from all those members present on Sunday go to James Nelhams who cooked us a full Sunday lunch in the panel kitchen!


Sunday Lunch in the Panel! Very civilised.

Thank you to everyone who has helped out, this weekend and previously to help us get to this stage. A huge number of people have done us a huge number of favours, we are very grateful indeed and promise to be putting everyone’s effort to very good use!

Swindon PSB Pin Badge Sets – Limited Edition


Click to enlarge.

Happy Birthday Swindon Panel!

To celebrate Swindon Panel’s 48th birthday (opened 3 March 1968), we are delighted to release our set of six, limited edition, Swindon Panel Society pin badges to celebrate the life of Swindon Panel and its movement into preservation.

Each badge is a different shape and colour and depicts a Swindon Panel-related image.

SN48, the signal on the end of platform 1 at Swindon, was picked as the panel was 48 years old this year.

The badges are £2 each or a complete set of 6 for £10.

The complete sets are available now via HOPS: https://www.heritage-ops.org.uk/product/242/
(Unfortunately it is not economical to sell the individual badges online, these can be purchased from us at DRC or any of our events).

All proceeds used in the move and preservation of Swindon Panel. Only a limited run will be produced so don’t miss out!

Welcome to Didcot Day – 30 April

30 APRIL 2016 at Didcot Railway Centre.

Come and welcome the panel, and let the Society welcome you, to Didcot!

Be among the first to see the panel as we take off the covers in its new home, and among the first to ceremonially kick-off the restoration with the re-insertion of the panel lamps and Dominoes.

The “Welcome to Didcot” Day is being held within the Great Western Society May steam gala, with many steam locomotives and signalling in operation on the Branch Line: All the more reason to come and visit Didcot that day!

We will be there from 10am onwards. In the afternoon there will be a photo-presentation on the panel move, plus a guest speaker from the Great Western Society, followed by fish and chips in the panel!

We look forward to seeing you there.

(Note this is all pending that the panel moves to Didcot as planned on 2nd April!)

Thank you for your help

I apologise for having taken until Thursday to write this (I am a bit swamped at the moment!), but THANK YOU very much indeed to everyone who gave their time and support at Swindon Panel last weekend!

All the Domino tiles were removed on Saturday, which was very impressive – I didn’t expect to get them all out in one day. The nameplates were also removed from the outside of the signal box and safely stored for preservation. Later that afternoon, two Network Rail people turned up with the intention of removing the plate, and it is doubtful whether they would have gone to the trouble that Andy and Vincent went to to remove it without damaging it, and much more likely that it would have been snapped off some of the difficult-to-remove bolts. So well done for saving the plate from the bin! We were also able to have a first look at the removal of the end doors.

As all the panel work had been completed on the Saturday, on Sunday we concentrated on doing work relating to the development of the electronic simulator for the panel. This advanced the work normally carried out on Monday evening telephone conferences by several weeks, so many thanks to everyone for getting involved in that. It was pleasant to be doing this in the surroundings of the panel that it is all in aid of.

Thank you very much for coming and giving your time and support. We are at DRC this weekend continuing preparations on the building, and then at Swindon PSB again every weekend after that until the move. Hopefully we’ll see some of you again over the next six weeks.

Thank you!

Panel Recovery Work Starts

A fantastic day was had at Swindon Panel today on the first of many dates preparing the panel for its move. The Domino tiles were successfully removed from the panel, wrapped, labelled and stored.

The photos below showing the last six tiles to be removed, from the top of Dauntsey bank. We were also pleased to be given the signal box name plate by Network Rail, which we weren’t expecting!

Thank you very much to everyone who came along and helped!